Global-machinery-company LTP25SS Bedienungsanleitung

125.4CC PETROL LINE TRIMMER LTP25SSINSTRUCTION MANUALBlackCyanMagentaYellowCode: LTP25SS IMDate: 061229 Edition: 01 Op: GM

105. Pull the recoil starter until you hear the engine starting or trying to start. (Under full choke it may only run for 1 or 2 seconds).6. Push the

11Feeding the lineWARNING. The engine of the petrol line trimmer must be at a complete stop during assembling, repair and cleaning operations that cou

128. When there is approximately 150mm of line left, lock one of the lines into one of the line location notches in the spool head and the other into

13Checking the spark plugCheck the spark plug every 10–15 hours of use. 1. Remove the spark plug cover.2. Use the spark plug wrench to remove the spar

14ProblemsPower loss or sudden stopping of the engine• Check whether the fuel tank is empty.• The mixture does not reach the carburettor. Clean the

15

GMC customer assistIf your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer

2ContentsWarranty Power ToolsWhilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufactur

3Description of symbolsThe rating plate on your tool may show symbols. These represent important information about the product or instructions on it

4SpecificationsEngine: 25.4cc, 2 strokeMax. speed: 9000min-1Cutting diameter (swathe): 380mm Line thickness: 2mmSpool type: Bump feed, twin lin

5• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the p

6Know your product 1. Cutting line spool and assembly2. Cut off knife3. Safety guard4. Handle5a. Upper shaft5b. Lower shaft6. Ignition switch7. Fuel t

7AssemblyPrior to use, it is necessary to assemble the safety guard (3) and cutting spool (1) to the lower shaft (5b) and join the lower shaft (5b) to

8Fitting the secondary handle WARNING. Before each use, ensure the secondary handle cannot swivel by tightening the secondary handle locking knob. Ov

9Filling The TankWARNING. Always shut off the engine before fuelling. Never add fuel to a machine with a running or hot engine. Move at least 9 m (30