Global-machinery-company REDEYE DB305SMS Bedienungsanleitung

• Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • ParisINSTRUCTION MANUALDB250SMSDB305SMS050805 ED05 PRDo

10UnpackingDue to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything

11Slide lockWhen tightened, the slide lock (29) prevents the saw head from sliding. Tighten the slide lock during transportation (fig. E).Mitre table

12Spindle lock buttonThe spindle lock button (26) prevents the blade in the saw from rotating (fig. K). Depress and hold the spindle lock button while

13Turning on and off1. To turn the saw on depress and hold the on/off trigger switch (24) (fig. S).2. To turn the saw off release the on/off trigger s

1412. Adjust the 0° bevel adjustment screw (35) with the 6mm hex key to bring the saw blade into alignment with the square (fig. Y).13. Loosen the 2 P

1511. Loosen the Phillips head screw holding the pointer of the mitre scale (22) and adjust it so that it accurately indicates the zero position on th

167. Hold the rotating guard (12) up and press the spindle lock button (26) (fig. k). Rotate the blade until the spindle locks.8. Use the 6mm hex key

17Cross-cutting (without slide action)When cutting a narrow piece of wood it is not necessary to use the slide mechanism. In these cases ensure that t

18Cross-cutting (with slide action)When cutting wide workpieces, first unscrew the slide lock (29).1. Pull on the release knob (6), raise the saw arm

19Compound mitre cutA compound mitre cut involves using a mitre angle and a bevel angle at the same time (fig. v). It is used in making picture frames

ContentsFull 2 Years Commercial and Trade Use WarrantyWhilst every effort is made to ensure your complete satisfaction with this tool, occasionally, d

20Using the laser line generatorWARNINGSDo not stare directly at the laser beam.Never aim the beam at any person or an object other than the workpiece

21MaintenanceWARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making and adjustments or mainte

22

23

Carefully read the entire Instruction Manual before using this product.Before returning this product for a Warranty Claim or any other reason Please C

3Description of symbolsThe rating plate on your tool may show symbols. These represent important information about the product or instructions on its

4Safety rules for laser lightsThe laser light/laser radiation used in the GMC Redeye® system is Class 2 with maximum 1mW and 400nm – 700nm wavelengths

5• The mitre saw can be safely carried by the main handle but only once it has been removed from the mains power and secured in the locked down posit

613. Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the

7• Never use your hands to remove sawdust, chips or waste close by the blade.• Use only blades as recommended by the manufacturer and which conform

8AccessoriesThe GMC DB250SMS / DB305SMS Double Bevel Slide Compound Mitre Saw is supplied with the following accessories as standard:• Saw blade (fit

9Know your productBefore using the saw, familiarise yourself with all the operating features and safety requirements.1. Laser light assembly2. Laser l