Global-machinery-company 040521 ED8 PR Bedienungsanleitung

1LSTSAW040521 ED8 PR • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • ParisINSTRUCTION MANUALTile Cuttin

10Blade guardThe blade guard (13) provides protection from both sides of the blade.With the power disconnected, adjust the guard so that it’s parallel

11holding the blade securing nut in an anti-clockwise direction to loosen the nut. 5. Remove the nut, outer blade flange and blade.6. Wipe a drop of o

12OperationMaking a straight cut1. Adjust the rip fence (15) to the desired width from the blade using the scale (12) on top of the table for referenc

13Making a bevel cut1. Loosen the front and rear bevel locking knobs (5 & 7).2. Tilt the table to the desired bevel angle using the bevel scales (

14move the assembly to the left or right until the laser line is in line with the blade.5. Tighten the laser light assembly locking knob.Changing the

15

16Carefully read the entire Instruction Manual before using this product.Before returning this product for a Warranty Claim or any other reason Please

2ContentsFull 2 Years Commercial and Trade Use WarrantyWhilst every effort is made to ensure your complete satisfaction with this tool, occasionally,

3Dear CustomerIf you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line fo

4Safety rules for laser lightsThe laser light/laser radiation used in the GMC REDEYE® system is Class 2 with maximum 1mW power and 400-700nm wavelengt

57. Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended

6• Replace damaged cutting wheel before operating.• Do not fill water compartment above water fill line.• Ensure that the directional arrow marked

7Required toolsNo tools are required to assemble this tool. 2 face spanners (supplied) are required to change the blade.UnpackingDue to modern mass pr

825Know your productBefore using the saw, familiarize yourself with all the operating features and safety requirements.1. Housing2. Carry handle3. On/

9Attaching the laser light assemblyTake the laser light arm (19) and position it on the left hand side of the saw. Fit the laser light arm locking kno